Interior Process 1.Set up  Rooms and areas to be painted are scheduled with the customer. Large furniture is moved into the center of the room.  Furniture is covered with plastic. Floors are covered with drop cloths. Extra care is take for hardwood floors.    2. Preparation Walls are scuff-sanded Holes and cracks are filled Gaps in trim are caulked Washing is done when required   3. Painting: Repaired areas are primed.  Two finish coats are applied to all surfaces. 4. Clean Up: Furniture is moved back to original positions. Floors and carpets are thoroughly vacuumed and swept. all garbage is removed. Touch-up paint is laveled and left with the customer  Exterior Process:   1. Cleaning  Pressure washing is performed before every job Delicate areas are hand -washed Loose paint chips and debris are cleaned up Areas cleaned are given time to dry    2. Pre Paint Preparation   All loose paint is removed, all bare areas are primed. All surfaces that will not be painted are covered to protect against splatter and drips. Outdoor furniture is removed and covered if necessary Glossy areas are scuff-sanded to allow for proper adhesion. If necessary, areas around doors and windows are caulked Feather-sanding and stripping are done as needed.   3. Painting   Two finish coats are applied for proper coverage Paint is applied with a brush, roller, or sprayer as warranted   4 Clean-Up   Performed daily and upon completion of the job All garbage is removed Left over paint is labeled and left with customer Outdoor fixtures and furniture are upt back to their original positions   5. Inspection The Fiore team conducts a site inspection to ensure job satisfaction. The customer walks around with the foreman or manager Final touch-ups are noted and completed before the team leaves The customer is given the Customer Comment Card for feedback and warranty. Payment is received.